|
|
Build Your Online Product Catalogs?
| Product Name: |
artificial stone mold making RTV-2 silicone
|
| Supply Ability: |
100000KG |
| Related proudcts |
rtv-2 silicone, liquid silicone, molding silicone, |
| Specifications |
liquid white |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen/Hongkong |
| Minimum Order |
200KG |
| Unit Price: |
6.2 |
|
Description of artificial stone mold making RTV-2 silicone
Artificial stone mold making rubber silicone, RTV-2 Silicone (room temperature vulcanization silicone) is a type of silicone rubber made from a two-component system (base plus curative; A+B) available in a hardness range of very soft to medium - usually from 15 Shore A to 40 Shore. RTV Silicones can be cured with either a platinum catalyst or a tin catalyst. Applications include making molds for reproducing.
Applications of artificial stone mold making rubber silicone
Artificial stone mold making rubber silicone, RTV-2 Silicone will reproduce the finest ***ail and is suitable for a variety of industrial and art related applications including prototypes, furniture, sculpture and architectural elements. RTV-2 Silicone can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).
Features of artificial stone mold making rubber silicone
Good characteristics of easy-operation
Light viscosity and good flowability
Low shrinkage
Favorable tension
No deformation
Favorable hardness
High temperature resistance, acid and alkali-resistance and ageing resistance
Procedures of mold making by RTV-2 Silicone Rubber
1. Clean and prepare specimen (apply consolidant, sealant, or release agent if necessary).
2. Build retaining wall around specimen.
3. Stir silicone base to loosen any settled material.
4. Decant desired amount of silicone into mixing container.
5. Mix in appropriate amount of catalyst.
6. Apply to specimen.
7. If reinforced mold is desired, gently press in gauze after pouring fist layer.
8. When cured, gently remove mold from specimen.
9. If needed, create rigid backing or jacket over mold with plastic,
urethane foam, or plaster.
10. Remove backing material and mold. Store mold inside rigid backing.
Package of RTV-2 molding silicone rubber
Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum |
| Company: |
MINGCHENG GROUP LIMITED
|
| Contact: |
Ms. Julie Wong |
| Address: |
No.3, Chuang Ye 2nd Rd., He Lu Industrial Zone, Huang Jiang |
| Postcode: |
523750 |
| Tel: |
0086-769-82693920 |
| Fax: |
0086-769-82606808 |
| E-mail: |
|
|
|
|
Home
